Introduction
This page explains the contents of a lavalier mic kit, available to borrow from the Tech Commons in the Library.
| Panel | ||
|---|---|---|
| ||
Purpose
Our Wireless Lavalier Mic Kit provides everything necessary to set up and use a wireless, wearable microphone that can be hooked up to any venue's sound system, or combined with one of our PA System kits.
Included in the Kit
- Hard Case
- Receiver
- 2 Antennas
- Lavalier Mic
- Wireless Mic Pack
- 2 AA batteries
- Power Adapter
Detailed Information: https://en-us.sennheiser.com/wireless-vocal-microphones-condenser-singing-live-performance-ew-512-g3
How to Set It Up
| Step | What to Do | How It Looks | ||
|---|---|---|---|---|
| 1 | Unpackage the receiver box, and attach the provided antennas to the “ANT I” and “ANT II” ports on the back of the receiver. |  | ||
| 2 | Plug the provided power adapter into the back of the receiver and into a power outlet. |  | ||
| 3 | Put new batteries in the body pack transmitter if necessary. |  | ||
| 4 | Turn it on by opening the front battery compartment and holding down the small “ON/OFF” button on the front left. | |||
| 5 | ||||
| 6 | ||||
| 7 | ||||
| 8 | ||||
| 9 | ||||
| 10 | ||||
| 11 | 5 | Make sure the frequency readouts on the receiver and transmitter are the same. For instructions, see "Change the Transmitter Frequency" and "Change the Receiver Frequency" sections below. |  | |
| 6 | Unbox the lavalier microphone. |  | ||
| 7 | Clip the mic to your person, and attach it to the transmitter. |  | ||
| 8 | Attach the transmitter to your person. |  | ||
| 9 | Run an XLR cable from the output of the receiver to the sound system you are using. |  |
Change the Transmitter Frequency
| Step | What to Do | How It Looks |
|---|---|---|
| 1 | Open the battery compartment, and click SET on the front. |  |
| 2 | Scroll through the menu options using the up and down arrows on the front of the pack until you reach “Advanced”. Press the SET button to select it. | |
| 3 | Scroll through until you reach “Tune”. Select it. |  |
| 4 | Change it to the desired frequency using the arrow and SET buttons. |  |
Change the Receiver Frequency
| Step | What to Do | How It Looks |
|---|---|---|
| 1 | Press the knob on the receiver to open the menu. |  |
| 2 | Twist and press the knob to go to Advanced > Tune. |
|
| 3 | Change it to the desired frequency using the knob. |  |
