Versions Compared

Old Version 5

changes.mady.by.user Timothy Pinkham

Saved on

compared with

New Version Current

changes.mady.by.user Timothy Pinkham

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Introduction

This page explains the contents of a lavalier mic kit, available to borrow from the Tech Commons in the Library.

Panel
titleRelated Topics

Tech Commons - Borrow Equipment

Tech Commons Borrowing Policies

Purpose

Our Wireless Lavalier Mic Kit provides everything necessary to set up and use a wireless, wearable microphone that can be hooked up to any venue's sound system, or combined with one of our PA System kits.

Included in the Kit

  • Hard Case
  • Receiver
  • 2 Antennas
  • Lavalier Mic
  • Wireless Mic Pack
  • 2 AA batteries
  • Power Adapter
  • XLR Cable

Detailed Information: https://en-us.sennheiser.com/wireless-vocal-microphones-condenser-singing-live-performance-ew-512-g3

How to Set It Up

StepWhat to DoHow It Looks
1Unpackage the receiver box, and attach the provided antennas to the “ANT I” and “ANT II” ports on the back of the receiver.
Image Modified
2Plug the provided power adapter into the back of the receiver and into a power outlet.
Image Modified
3Put new batteries in the body pack transmitter if necessary.
Image Modified
4Turn it on by opening the front battery compartment and holding down the small “ON/OFF” button on the front left.
5

Make sure the frequency readouts on the receiver and transmitter are the same.

For instructions, see "Change the Transmitter Frequency" and "Change the Receiver Frequency" sections below.

Image Modified
6Unbox the lavalier microphone.
Image Modified
7Clip the mic to your person, and attach it to the transmitter.
Image Modified
8Attach the transmitter to your person.
Image Modified
9Run an XLR cable from the output of the receiver to the sound system you are using.
Image Modified

Change the Transmitter Frequency

StepWhat to DoHow It Looks
1Open the battery compartment, and click SET on the front.
Image Modified
2

Scroll through the menu options using the up and down arrows on the front of the pack until you reach “Advanced”.

Press the SET button to select it.
3Scroll through until you reach “Tune”. Select it.
Image Modified
4Change it to the desired frequency using the arrow and SET buttons.
Image Modified

Change the Receiver Frequency

StepWhat to DoHow It Looks
1Press the knob on the receiver to open the menu.
Image Modified
2Twist and press the knob to go to Advanced > Tune.

Image Modified

Image Modified
 


3Change it to the desired frequency using the knob.
Image Modified