How to Use Cisco AnyConnect (Biola's VPN)

Introduction

This page explains the steps for connecting to Biola VPN on a Mac or a Windows PC.

VPN allows authorized users to connect to Biola's local, on-campus network from off campus.

Before beginning this procedure, you must have an active VPN account and install Cisco AnyConnect (Mac or Windows).

All staff and faculty VPN accounts are active by default. Non-employee (students, alumni, etc.) access must be requested by an employee. This access can be requested through the access request form here.

Test

Related Topics

About Remote Access with VPN

Internet and Network

How to Connect to Cisco AnyConnect on a Mac

Step	What to do	How It Looks
1	Open Cisco AnyConnect. The application is stored in Macintosh HD/Applications/Cisco.
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	Click Accept.
6	To disconnect from AnyConnect, click on the AnyConnect icon in the menu bar at the top of the screen, and select Disconnect.

How to Connect to Biola's VPN on Windows

Step	What to Do	How It Looks
1	Open Cisco AnyConnect. You can find it by opening the Start menu, and searching for "anyconnect".
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	To disconnect from AnyConnect, click the arrow in the System Tray, then right-click on the AnyConnect icon and select "VPN Disconnect".

Introduction

This page explains the steps for connecting to Biola VPN on a Mac or a Windows PC.

VPN allows authorized users to connect to Biola's local, on-campus network from off campus.

Before beginning this procedure, you must have an active VPN account and install Cisco AnyConnect (Mac or Windows).

All staff and faculty VPN accounts are active by default. Non-employee (students, alumni, etc.) access must be requested by an employee. This access can be requested through the access request form here.

Related Topics

About Remote Access with VPN

Internet and Network

How to Connect to Cisco AnyConnect on a Mac

Step

Step	What to Do	How It Looks
1	Open Cisco AnyConnect. The application is stored in Macintosh HD/Applications/Cisco.
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	Click Accept.
6	To disconnect from AnyConnect, click on the AnyConnect icon in the menu bar at the top of the screen, and select Disconnect.

How to Connect to Biola's VPN on Windows

Step	What to Do	How It Looks
1	Open Cisco AnyConnect. You can find it by opening the Start menu, and searching for "anyconnect".
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	To disconnect from AnyConnect, click the arrow in the System Tray, then right-click on the AnyConnect icon and select "VPN Disconnect".

Introduction

This page explains the steps for connecting to Biola VPN on a Mac or a Windows PC.

VPN allows authorized users to connect to Biola's local, on-campus network from off campus.

Before beginning this procedure, you must have an active VPN account and install Cisco AnyConnect (Mac or Windows).

All staff and faculty VPN accounts are active by default. Non-employee (students, alumni, etc.) access must be requested by an employee. This access can be requested through the access request form here.

Related Topics

About Remote Access with VPN

Internet and Network

How to Connect to Cisco AnyConnect on a Mac

Step

Step	What to Do	How It Looks
1	Open Cisco AnyConnect. The application is stored in Macintosh HD/Applications/Cisco.
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	Click Accept.
6	To disconnect from AnyConnect, click on the AnyConnect icon in the menu bar at the top of the screen, and select Disconnect.

How to Connect to Biola's VPN on Windows

Step	What to Do	How It Looks
1	Open Cisco AnyConnect. You can find it by opening the Start menu, and searching for "anyconnect".
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	To disconnect from AnyConnect, click the arrow in the System Tray, then right-click on the AnyConnect icon and select "VPN Disconnect".

Introduction

This page explains the steps for connecting to Biola VPN on a Mac or a Windows PC.

VPN allows authorized users to connect to Biola's local, on-campus network from off campus.

Before beginning this procedure, you must have an active VPN account and install Cisco AnyConnect (Mac or Windows).

All staff and faculty VPN accounts are active by default. Non-employee (students, alumni, etc.) access must be requested by an employee. This access can be requested through the access request form here.

Related Topics

About Remote Access with VPN

Internet and Network

How to Connect to Cisco AnyConnect on a Mac

Step

Step	What to Do	How It Looks
1	Open Cisco AnyConnect. The application is stored in Macintosh HD/Applications/Cisco.
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	Click Accept.
6	To disconnect from AnyConnect, click on the AnyConnect icon in the menu bar at the top of the screen, and select Disconnect.

How to Connect to Biola's VPN on Windows

Step	What to Do	How It Looks
1	Open Cisco AnyConnect. You can find it by opening the Start menu, and searching for "anyconnect".
2	When prompted, type "vpn.biola.edu" into the field if it isn't there already.
3	Click Connect.
4	If prompted, enter your NetID and password, then click OK.
5	To disconnect from AnyConnect, click the arrow in the System Tray, then right-click on the AnyConnect icon and select "VPN Disconnect".