Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


Table of Contents

Need Help?

Please contact Biola Tech Support. For contact information, methods, and hours please visit our Biola Tech Support page.

Introduction

This page shows and describes what cables are on a Vaddio conferencing unit





Cable Information

A cable snake runs from the circular Vaddio unit. The picture below tells you which cable is which.

VGAVideo connection for computers that use VGA. This allows you to share your computer screen to the TV, or to the audience on the other end of a web conference. Only use this if your computer doesn't have an HDMI port.
HDMIVideo connection for computers that use HDMI. This allows you to share your computer screen to the TV, or to the audience on the other end of a web conference. Use HDMI when possible. It looks better on the screen.
EthernetThis is a wired connection to Biola's network. You don't need this if you're using wireless.
USBThis connects your computer to the Vaddio's web camera for online meetings.



What the buttons are called



Camera Modes and What They Do

  The mode button cycles through the following options when pressed.

NormalSends the Vaddio camera signal to the user on the other end of the web conference.
Presentation

Sends the video from the presenter's computer screen, with the Vaddio camera signal displayed picture-in-picture (PIP) in the corner.

ConferenceSends only the video from the presenter's computer screen.

With both Presentation and Conference modes: If your computer is using an extended desktop (instead of mirroring), the user will see the content from the TV (secondary display).



Presentation Troubleshooting

Before using the Vaddio system, flip the base station over, and make sure all five cables are securely seated in their ports. Then flip it right-side up again.




  • No labels