/
How to Start/Join a Cisco Conference Phone Meeting

How to Start/Join a Cisco Conference Phone Meeting


Introduction

This page outlines how to start an audio-only meeting using a Cisco Conference Phone.




StepWhat to do
1

Dial "9", the area (or country) code, and phone number (e.g. 915621234567).

2

Wait for tone, or wait for visual prompt on conference phone screen.

3

Enter your department's Dialing Authorization Code (DAC) and press #.  

4

Wait for the call to be placed.

Note: 

  • You do not need to know or use a DAC code if other participants call in by dialing your conference phone number (located on the phone's display.
  • A Cisco Conference Phone meeting can facilitate a maximum of 16 participants.


Related content

How to Add Additional Participants to a Cisco Conference Phone Meeting
How to Add Additional Participants to a Cisco Conference Phone Meeting
More like this
Call using a Cisco conference phone and a DAC
Call using a Cisco conference phone and a DAC
More like this
How to Add Incoming Call to Cisco Conference Phone Meeting
How to Add Incoming Call to Cisco Conference Phone Meeting
More like this
How to Start/Join a Crestron Mercury Phone Meeting
How to Start/Join a Crestron Mercury Phone Meeting
More like this
How to Join a Phone-based Conference Call on a Crestron Mercury
How to Join a Phone-based Conference Call on a Crestron Mercury
More like this
Cisco Conference Phone
Cisco Conference Phone
More like this