How to Start/Join a Crestron Mercury Phone Meeting
- Brian Hinds (Unlicensed)
Owned by Brian Hinds (Unlicensed)
Introduction
This page outlines how to start an audio-only meeting using a Crestron Mercury Conference Phone.
| Step | What to Do | What It Looks Like |
|---|---|---|
| 1 | Tap the phone icon at the bottom of the touchscreen. |
|
| 2 | Tap the Audio icon. | |
| 3 | To call an off-campus number: Dial “9” + area (or country) code + phone number + Dialing Authorization Code To call an on-campus number: Dial the extension, just like you would from any on-campus phone. | |
| 4 | Tap the green phone icon. |
|
Note:
- You do not need to know or use a DAC code if other participants call in by dialing your conference phone number (located on the phone's display.
- A Crestron Mercury Conference Phone can facilitate calls with a single caller.